DEKKO VM-8200 Vibration Meter

DEKKO VM-8200 Vibration Meter Features • In accordance with ISO 2934, used for periodic measurement, to detect out-of-balance, misalignment and other mechanical faults in rotating machines. • Speciality designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning and predictive maintence purpose. • Individual high quality accelerometer for accurate and repeatable measurements. • Bearing conditions monitoring function. • LCD digital display. • Lightweight and easy to use. • Wide frequency range ( 10Hz to 10KHz) in acceleration mode. • AC output socket for headphones and recording. • Optional headphones for use as electronic stethoscope. • Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface. Specification Display : 4 digits, 18 mm LCD, Measured values and makers ( units, 10, and battery symbol) Transducer : Piezoelectric accelerometer. Parameters measured : Velocity, Acceleration, Displacement RPM and Frequency. Measuring range : Velocity : 0.01 - 40.00cm/ s true RMS 0.000 - 16.00inch/ s Acceleration : 0.1 - 400.0m/ s equivalent peak 0.3 - 1312ft/ s Displacement : 0.001 - 4.000mm 0.04 - 160.0mil, equivalent pk - pk RPM ( r/ min) : 60 - 99.990r/ min Reading should be multiplied by 10 if the display show ‘ 10’ . Frequency : 1 - 20kHz. Frequency range for measuring Acceleration : 10Hz to 10kHz in ‘ 1’ mode. 10Hz to 10kHz in ‘ 10’ mode for bearing condition check. Velocity : 10Hz to 1kHz. Displacement : 10Hz to 1kHz. Accuracy : ± 5% ± 2digits. Metric/ Imperial conversion. PC interface : RS232C. Output : AC output 2.0V peak full scale ( load resistance above 10k) . Power supply : 4 x 1.5AAA size ( UM-4) batteries. Power off : 2 modes, Manual off at any time. Operating conditions : • Temperature : 0° - 50° C. • Humidity : below 90% RH. Dimensions : 124 x 62 x 30mm/ 4.9 x 2.4 x 1.2inch. Weight : 120g ( not including batteries) . Accessories included: • Powerful rare earth magnet • Accelerometer • Stringer probe ( Cone) • Stringer probe ( Ball) • Carrying case • Operation Manual Optional accessories : • Headphone for use as electronic stethoscope • Cable and software for RS232C