APPA 607 Series Insulation Tester and Multimeter

APPA 607 Series Insulation Tester and Multimeter Simple, Smart and Powerful DAY & NIGHT An innovative auto ON/ OFF backlit feature give you fulltime display visibility and increased battery life. INSULATION TESTING Insulation testing with leakage current display ( 605) and testing range up 20GOhm with 50V, 100V, 250V, 500V and 1000V DC testing voltage. LOW PASS FILTER( HIGH FREQUENCY REJECTION) By pass the noise of electrical equipment for stable reading of measurement. CONVENIENT REPETITIVE TESTING Ergonomically designed remote test probe for repetitive testing without pressing the TEST button on Tester/ Meter for better convenience. EXTRA PROTECTION Ergonomically designed slim shape protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter. BATTERY & FUSE EASY TO REPLACE Unscrew only one screw to remove battery door for battery replacement and fuse replacement, designed for user' s convenience without opening the bottom case. SPECIFICATONS Voltage DC • Ranges: 100mV~ 1000.0V • Best accuracy: + / -( 0.08.0% + 2d) • Resolution: 0.01mV • Input Impedance: 10MOhms • Overload Protection: 1000V rms or DC Voltage AC • Ranges: 100mV~ 1000.0V • Best accuracy: + / -( 0.9% + 3d) 50Hz~ 5KHz • Resolution: 0.01mV • Input Impedance: 10MOhms/ / 100pF • Overload Protection: 1000V rms or DC • Conversion Type: True RMS indicating Current DC • Ranges: 100mA~ 400mA • Best accuracy: + / -( 0.2% + 2d) • Resolution: 0.01mA • Input Protection: 440mA/ 1000V DC/ AC fuse Current AC • Ranges: 100mA~ 400mA • Best accuracy: + / -( 1.5% + 2d) • Resolution: 0.01mA • Input Protection: 440mA/ 1000V DC/ AC fuse Ohm/ Earth Bond Resistance • Ranges: 1000Ohms~ 40MOhms • Best accuracy: + / -( 0.5% + 2d) • Resolution: 0.1Ohm • Overload Protection: 1000V rms or DC Continuity Beeper : < 30Ohm, 2KHz tone buzzer Diode Test : Open Circuit Voltage: 3V DC Insulation Resistance • Test Voltage Ranges: 50V, 100V, 250V, 500V, 1000V DC • Resistance Ranges: 0.001MOhms~ 22GOhms • Best accuracy: + / -( 1.5% + 5d) • Resolution: 1KOhms • Overload Protection: 1000V rms or DC Frequency Counter • Ranges: 10Hz~ 100KHz • Best accuracy: + / -( 0.1% + 5d) • Resolution: 0.01Hz • Overload Protection: 1000V rms or DC Capacitance • Ranges: 10nF~ 40mF • Best accuracy: + / -( 1.2% + 2d) • Resolution: 0.001nF • Overload Protection: 1000V rms or DC Tempeature • Ranges: -200~ 1200Celsius degree • Best accuracy: + / -( 1.0% + 1Celsius degree) • Resolution: 0.1Celsius degree • Overload Protection: 1000V rms or DC GENERAL: Sampling rate: 6times/ sec Overload Indication: " OL" or " -OL" Lower Battery Indication: Auto Power Off: 20 minutes Operating Temp. : 0~ 50Celsius degree, < = 80% R.H. Storage Temp. : -20~ 60Celsius degree Temp. coefficient: 0.15( Spec.Acc) / Celsius degree, 28Celsius degree Safety: IEC61010 and designed to meet UL61010, CAT.IV600V( 605) APPA 607 also has CAT.III 1000V rating. Power Requirement: AA size 1.5V X 4 batteries( NEDA 15A or IEC LR6) Battery Life: 80 hours ( Alkaline battery) Size: 95mm( W) x 200mm( L) x 51.20mm( H) , Without holster Weight: 630 grams ( with holster) Accessories: Remote Probe, Test Leads, Alligator Clips, Protective Holster, Magnetic Hanging Kit, Alkaline batteries ( installed) and Manual. APPA 607 also included Temp. adaptor and Bead Probe.