Detail Goot RX-802AS Digital Lead Free Soldering Station
Goot RX-802AS Digital Lead Free Soldering Station
Goot RX-802AS is an anti-static easy to use Soldering Station with fast response time. With a new sensor integrated into the heater, the 72W heat capacity allows faster temperature recovery during heavy soldering, reducing the reaction time even at lower temperature settings. Stability during heavy soldering enables low temperature soldering and reduces the risk of thermal shock to low capacity electronic parts.
MAIN FEATURES
Superior heat recovery
Built-in high-powered heater ( 72W) capable of delivering enough power to maintain stable tip temperatures, even under different soldering work conditions. Minimal heat loss means the user doesn' t have to set the station at a higher set temperature. Capable of being set at lower temperatures, therefore decreasing tip degeneration when soldering with high melting point lead-free solder.
Thick iron coating
All RX-80HRT tips have a thick iron coating. For example, the thickness of the B-type iron coating is 0.5mm or above, while the thickness of tips in competitor irons are between 0.25mm and 0.3mm. More thickness assures longer tip life.
Superior sleep function ( Patented)
Automatic switch off when inactive for a preset period of time. This is easier on the tips than switching the unit OFF. This unit' s sleep function can be programmed to activate at preferred inactive time periods, or can be programmed to go into sleep mode at a certain drop in tip temperature, therefore applicable to a variety of work conditions. ( Competitor stations have one set mode only.) Further, before sleep mode activates, the sleep lamp flashes, warning the user that the unit is about to enter sleep mode. Bringing the tool out of the Sleep Mode is as easy as wiping the tip on a sponge to clean the tip.
Fastest in it' s class
Reaches tip temperature in 6 seconds. ( Equivalent products among competitors take an average of 15 seconds.)
Light and compact handpiece
The soldering iron weighs 27 g, the lightest in the 70W station class. ( Competitor models weigh 30g.) The soldering unit cord is designed with a thin and very pliable cable with the diameter 4mm. ( Competitors cable diameter - 4.6mm.) RX-802AS Handpiece compared to competitors: It is a neglected point but, the biggest selling point of the RX-802AS is that the whole iron length of the handpiece is shorter that competitor irons. It is not enough that the distance between tip and handpiece is short. Pulling force from the cable is applied to the tip every time the iron is moved. This has adverse effects for operation. Lessening this force is important to the operator. Shorter iron length makes this force smaller.
Easy-change tip
One-Step-Slide tip can be changed while the tips remain hot. New tip can be inserted without danger of burns because the tip does not heat until the operator pushes any button on the control unit. Six seconds after pushing any button the unit is ready for full operation.
RX-802AS Replacement tips compared to competitors:
No tools needed for changing the tip, also no heat-resistant pads!
Tips can be stored in the RX-802AS soldering iron stand which comes with the unit. The user must purchase separately with some competitor stations.
The tips are designed NOT to come in contact with the surface when placed on a workbench.
Specifications
MODEL RX-802AS
Voltage : 240V AC 50/ 60Hz
Power Consumption : 80W
Soldering Unit Voltage/ Consumption : 24V AC/ 72W
Temperature Setting Range : Room temp.-450° C
Dimensions
• Control Unit : 158mm ( w/ o cord bushing )
• Soldering Unit : 146( L) × 115( W) × 98( H) mm
Weight
• Control Unit : Approx. 27g ( w/ o cord )
• Soldering Unit : Approx. 1.8kg ( w/ o cord )
Leak Voltage : Less than 2mV
Ground Resistance : Less than 2©
Control Unit to Soldering Unit Cord Length : 1.2m
Power Cord Length : 1.2m ( 3 core cord) ground plug
Accessory : Soldering Iron Stand ( ST-20)
Tampilkan Lebih Banyak